How to Clean a 14k Gold Bracelet?

Gold bracelets can get dirty easily. There are various ways to do it. In this blog, I will give you various methods you can use to clean it. In addition to this, you will also discuss other things. Therefore, let’s get right into it:

What's that 14k Gold Bracelet About to Run

Gold jewelry will get dull after some time, slowly wearing off its shine. Dirt, oils, and residues will form on it. It indicates that cleaning is important to maintain, and sometimes it can be in a damaged state. A smooth bracelet also feels good on your wrist. Before You Start Cleaning, You Will Need:

 Gentle dish soap: this is an important element

• Emotionally warm

• Soft-bristled toothbrush

• Soft fibers

• Tiny bowl

• A clean towel

Note this down and get these items before you start. It is as simple as that.

VISIT FOR :: Custom Jewelry

Step 1: Preparation of Cleaning Solution

Preparation is the first step. You need to collect items and bring your jeweler, make it ready for cleaning. Fill up a small bowl with warm water. Into the warm water, add mild dish soap. Gently stir the solution to form suds, which you will now use to clean the dirt and grime off your bracelet. This is a very important step.

Step 2: Soak the Strap

After preparation, you need to start with the second step. Here, you need to just dip your 14k gold bracelet into the soapy water. Let's stay there for about 15 minutes.

It is obvious that this will loosen any dirt and oil on the bracelet. This is a super simple step that doesn’t take all that time.

Step 3: Soft

Take a soft-bristle toothbrush and gently scrub the bracelet; work it really well into areas where there are cracks or crevices in which dirt may have collected. Remember to be gentle, though—don't scrub the gold.

Step 4: Rinse in Clean Water

This is a step for. You need to watch the bracelet. For this, you need to use warm water. This will help you clean. You need to make sure all the soap is washed off. If there is any soap, it can leave marks. This will spoil the look. This is one of the most important steps. Once you are done with this, we move to the 5th step.

Step 5: Lint-Free Soft Towel Dab Dry

This should then be pat-dried with a soft cloth. Not paper towels, which can scratch the gold. The bracelet can be laid on a clean, soft towel to air dry completely before enjoying it again.

How to Care for Your Bracelet?

There are various important things to keep in mind. Let’s look at a few things to keep in mind on how to take care.

• Routine Care: It is recommended that you clean your bracelet occasionally in order not to get dirt and oils accumulated.

• Avoid Strong Chemicals: Keep your bracelet away from bleach, chlorine, and other unfriendly chemicals. They might just be too harsh for the gold's well-being.

• Proper storage: When not in use, keep your bracelet in a soft cloth or jewelry box.

VISIT FOR :: Which Hand To Wear Crystal Bracelet – Left Or Right Wrist?

Mistakes Not to Make

There are various common mistakes that people make. This happens when you try to take care of your gold bracelet.

Let’s look at these mistakes and how to avoid them.

• Abrasive use: Toothpaste or baking powder will make abrasive nature and hence should not be used on your gold bracelet.

• Avoid Skipping the Rinse: Remember to rinse away all soap, otherwise a dull residue might form.

• Use with Hot Water: Gold discoloration may result with hot water. In this regard, you need to use lukewarm water.

Alternative methods of cleaning

There are some alternative methods as well. You can use these to clean your gold bracelet. Let’s look at these methods mentioned below.

Method 1: Jewelry Cleaning Solution

The first method is this. You can buy a cleaning solution. Buy a commercial product for cleaning jewelry and follow all package instructions. Such products are designed to clean gold and a few other kinds of precious metals without damage. This is a very simple method. You just need to follow instructions.

Method 2: Ultrasonic Cleaner

The second method is a tool. An ultrasonic cleaner utilizes sound waves to clean jewelry. Now, place your bracelet inside with the recommended solution indicated by the manufacturer for cleaning. Turn it on and let it clean for a few minutes. Rinse and dry the bracelet. It’s as simple as that. You don’t even need any help.

Conclusion

Remember that regular cleaning avoids harsh chemicals and proper storage of metals. Your bracelet will surely shine for years ahead. It’s important to follow the steps. With this being said, the blog wraps up and concludes.

READ MORE :: Is 925 Sterling Silver Affected by Water?